A Think Again Media Group publication
Everyone Believes

The measurements behind a riverfront silhouette

Gateway Arch: equal dimensions and a complicated construction

By Phil Springer, Editor · Published · Everyone Believes

Gateway Arch: equal dimensions and a complicated construction

The Gateway Arch has two identical overall dimensions: a maximum height of 630 feet and an outer width of 630 feet. The National Park Service defines the horizontal measurement as the distance from the outside of the north leg to the outside of the south leg. The equality concerns those outer edges at ground level, rather than the narrower opening between the legs.

Architect Eero Saarinen approached the memorial as a composition within a larger environment. Michael A. Capps, writing for the National Park Service, traced that outlook to Saarinen's artistic upbringing. His father, Eliel, was an architect, while his mother, Loja, worked in sculpture, weaving, photography and architectural models. Eero studied architecture at Yale from 1930 to 1934, travelled in Europe on a fellowship, and returned to work with his father. The 1947 memorial competition offered an opportunity to establish an independent architectural identity. He considered several conventional monumental forms before settling on a great arch beside the Mississippi. His conception included a small forest at the river's edge, making the surrounding ground part of the architectural setting. Later commissions included the General Motors Technical Center, New York's TWA Terminal and Dulles International Airport. Saarinen died in 1961, before completion of the memorial that had launched his independent career.

The Gateway Arch emerged from a competition with 172 entries received by the September 1, 1947 deadline. Five designs reached the final stage. Saarinen's collaborative team included landscape architect Dan Kiley, associate architect J. Henderson Barr, painter Alexander Girard and sculptor Lily Swann Saarinen. The winning design was announced on February 18, 1948. A National Park Service master plan in 1959 adapted the Saarinen and Kiley scheme, and groundbreaking ceremonies took place that June. The completed arch followed on October 28, 1965. Saarinen's proposal had entered the competition as Design Number 144 under the name Saarinen, Saarinen and Associates.

J. E. N. Jensen's construction history described a structure whose smooth surface concealed substantial engineering. Saarinen had proposed stainless steel and asked structural engineer Fred Severud to study its feasibility. Each leg had an equilateral triangular section, 54 feet on a side at ground level and 17 feet at the top. The dimensions narrowed as the two legs rose toward their meeting point. Their double steel walls were approximately 3 feet apart at the bottom, with a much smaller interval higher up. Above 400 feet, that interval measured only 7¾ inches. Reinforced concrete occupied the space between the walls through the lower 300 feet; steel stiffeners served above that level. Jensen emphasized that the arch had no conventional structural skeleton. Its connected inner and outer steel skins formed the load-bearing structure, with carbon steel inside and stainless steel outside. His description compared the overall curve with a heavy suspended chain turned upside down. The individual sections also differed in height, from 12 feet at the base to 8 feet for the keystone sections.

The Gateway Arch fact sheet records 142 sections and an exterior stainless steel plate thickness of a quarter inch. It also separates the quantities of concrete below ground from those between the steel skins: 25,980 tons in the foundations and 12,127 tons within the lower structure. The fact sheet assigns 886 tons to the stainless steel exterior and 2,157 tons to the carbon steel inner skin. Even the observation room was comparatively confined, at about 65 feet long and a little over 7 feet wide, within the tapering structure at the top.

The interior also required an unusual transportation system. Its design brief specified large daily passenger totals without any distortion of the exterior profile. Conventional elevators, escalators and a Ferris wheel were considered, but each posed difficulties. Dick Bowser devised a train of capsules combining principles associated with elevators and Ferris wheels. Each of the two trams contained eight cars, with five seats in a car. The capsules changed their orientation during the journey as the track followed the arch's curve. The National Park Service dates the first ride to July 24, 1967, after completion of the exterior structure. The original brief called for 3,500 passengers during an eight-hour day, with an upper figure of 11,000 over fourteen hours.

The landscape continued to develop after the Gateway Arch itself was finished. Walkways and tree planting followed in 1972, while the grand staircase was completed in 2003. Kiley's forest-and-meadow concept combined open ground, ponds, groves and tree-lined avenues. Curving paths and changes in the ground repeated the geometry of the monument, and the broad riverfront stairs carried that relationship toward the Mississippi. The National Park Service's landscape record identifies London plane avenues and bald cypress groves among the plantings around two ponds.

True or False?

The Gateway Arch is taller than it is wide at ground level.

Show the answer

The Record

The Gateway Arch measures 630 feet in height and 630 feet across at ground level. The National Park Service specifies that the width runs between the outer faces of its two legs.

Send this question to a friend

Read next

By clicking “Send me the real story” you agree to Everyone Believes’ Terms of Use and Privacy Policy.